Electro-Chemical Devices (ECD) SMS22 - Manual (Page 9)

UNPACKING THE INSTRUMENT
Your Electro-Chemical Devices instrument has been carefully packaged to protect it from damage during shipment and
dry storage. Upon receipt please follow the procedure outlined below.
1. Before unpacking, inspect the condition of the shipping container to verify proper handling by the carrier. If
damage is noted, save the shipping container as proof of mishandling for the carrier.
2. Check the contents of the shipping container with the items and quantities shown on the packing list.
Immediately report any discrepancies to ECD.
3. Save the original packing material until you are satisfied with the contents. In the event the product(s) must be
returned to ECD, the packing material will allow you to properly ship it to ECD.
4. Familiarize yourself with the instrument before installation, and follow proper installation and wiring
procedures.
List of Hazards
Hazard of electrical shock
This symbol is used to present a hazard of severe electric shock or
electrocution. All controls and maintenance on electrical devices
labelled with this symbol should be made by qualified personnel in
accordance with national or local regulations. Qualified Personnel
means person who has been fully trained and has professional
experience to avoid electricity hazards and dangers. To avoid
potential fatal electrical shock and/or analyzer damage always
disconnect input power to analyzer before servicing.
Involved parts:
·main power supply
·peristaltic pump
motor
·input terminal
Hazard of chemical burns
This symbol is used to present an hazard of severe burns and seroius injury
for dangerous chemicals manipulation. All handling and manipulations
operations maintenance on chemicals labelled with thi symbol should be
made by qualified personnel in accordance with national or local regulations.
Qualified Personnel means person who has been fully trained and has
professional experience to avoid chemical hazards and dangers. Before to
proceed to every handling of chemicals and to proceed with service
operations, read the material safety data sheets supplied with each chemical
to take all the necessary precautions when handling.
Involved parts:
· fluidics section
· reagent container
Harmful
Specific indication depending on the parameter analysed and the chemical
colorimetric method used. See appendix of the manual.
Involved parts:
· fluidics section
· reagent container
Warning of general hazard
This symbol means that is necessary read this manual before to proceed to
any service operation to know exactly how to operate in proper way. Only
qualified personnel or bbbbully trained on analyzer use and maintenance is
allowed to proceed with service operations on the unit.
SMS-22 Page ix