3 configuration and trim menu, 3 menu functions & options, 1 home screen – Electro-Chemical Devices (ECD) SMS22 User Manual
Page 19
Screen Displayed
Button Pressed
Home Screen
MENU SELECT
▲
Parameter Selection Screen (Ch 2 Status) MENU SELECT
▲
Parameter Selection Screen (Ch 2 Set-Up) MENU SELECT
▲
Parameter Selection Screen (Ch 2 Buffer) MENU SELECT
▲
Contrast (adjustment screen)
MENU SELECT
▼….. To return to the Home screen
3.2.3 Configuration and Trim Menu
The Configure/Trim menu provides access to the menus used to assign parameters, define functions and
trim input and output signals. This group of menus should rarely be needed as the instrument was
configured at the factory before testing and shipment. The basic structure is as follows. See the “System
22 Configuration Manual” for details about these menus, available
Screen Displayed
Button Pressed
Configure/Trim
◄ CALIBRATE ► (enter screen)
Passwords
MENU SELECT ▼(allows menus to be password protected)
Default Display
MENU SELECT ▼(defines Home Screen)
4-20 assign
MENU SELECT ▼(Assigns parameter/function to mA output)
Manual Mode
MENU SELECT ▼(Allows manual control of mA outputs)
Relay assign/Test
MENU SELECT ▼(Assigns triggering parameter to a relay)
PID Assign
MENU SELECT ▼(Assigns PID to a PV)
PWM Assign
MENU SELECT ▼(Assigns Pulse Width Modulation to a PV)
Clock and timers
MENU SELECT ▼(Sets Clock function, assigns Timers)
Logic Gates
MENU SELECT ▼(assigns AND/OR gates)
Ion Species
MENU SELECT ▼(Sets Ion Measured)
General
MENU SELECT ▼( Not Used)
°C/°F & Temp Cal
MENU SELECT ▼( allows temperature trim/cal, choose °C/°F)
4-20 Trim/Test
MENU SELECT ▼(allows mA trim)
Millivolt Trim
CALIBRATE ▼ (return to Home Screen)
3.3 MENU FUNCTIONS & OPTIONS
This section describes the functions of each of the Menu items and how they are configured and used.
3.3.1 Home Screen
The Home Screen displays the Channel 1 PV, Sulfide ppm, % mA output and temperature. Channel 2 PV
displays the pH Value, % mA Output and temperature. When the cursor is on a menu line, not in the
menu setting a parameter, pressing the down (
▼) CALIBRATE key will return the cursor to this screen,
the HOME Screen, from any menu.
SMS-22
Page 10