Electro-Chemical Devices (ECD) CA6 Hardness Analyzer User Manual

Instruction manual model ca-6 analyzer hardness, Lectro, Hemical

Text mode
Original mode

LECTRO-

HEMICAL

EVICES

Instruction Manual

Model CA-6 Analyzer

Hardness

The information and technical data disclosed in this document may be used and disseminated only for the purposes and to the
extent specifically authorized in writing by Electro-Chemical Devices. Electro-Chemical Devices reserves the right to change
published specifications and designs without prior notice.

Rev: B– 10/14

This manual is related to the following products:

CA6 Aluminum Analyzer CA6 Manganese Analyzer CA6 Silica Analyzer CA6 Nitrite Analyzer CA6 Total Phosphorus Analyzer CA6 Phosphate Analyzer CA6 Sulfate Analyzer CA6 Zinc Analyzer CA6 Iron Analyzer CA6 Copper Analyzer CA6 Nickel Analyzer CA6 Chromium VI Analyzer

Table of contents

Document Outline

PREFACE
TABLE OF CONTENTS
TERMS AND CONDITIONS OF SALE
RETURNED GOODS POLICY
IMPORTANT SERVICE INFORMATION
UNPACKING THE INSTRUMENT
1.0 OVERVIEW
- CONTENTS:
- 1.1 Safety Precautions, Instructions and Hazards
1.0.1 CA-6 Technical Specifications
2.0 INTRODUCTION – Analyzer Description
3.0 OPTIONS
- 3.1 Dilution Module
- 3.2 Oxidation/Digestion Module
4.0 INSTALLATION
5.0 REAGENTS PREPARATION
- 5.1 Method of Analysis
6.0 ANALYZER INITIAL START-UP
- 6.1 Sample and Drain Tubing Connections
- 6.2 Powering, Priming and Starting the Analyzer
7.0 CALIBRATION
8.0 USER INTERFACE
9.0 MAINTENANCE
10.0 ANALYZER SHUT DOWN
11.0 REAGENT RECIPE and PROGRAM SEQUENCE