Dimplex DFB8842 - Manual (Page 15)

15
Maintenance
WARNINg: Disconnect
power before attempting any
maintenance or cleaning to
reduce the risk of fire, electric
shock or damage to persons.
Light Bulb Replacement
Allow at least five (5) minutes for
light bulbs and heater to cool off
before touching bulbs to avoid
accidental burning of skin.
Light bulbs need to be replaced
when you notice a dark section
of the flame. There are three
(3) under the Log set, which
generate the flames and embers,
and two (2) bulbs above the log
that illuminate the log exterior .
Helpful Hints
It is a good idea to replace all
light bulbs at one time if they are
close to the end of their rated life.
Group replacement will reduce
the number of times you need
to open the unit to replace light
bulbs. Care must be taken when
removing the Log Set as the Log
set contains LED’s and wires.
Lower Light Bulb Requirements
Quantity of three (3) clear chan-
delier or candelabra bulbs with an
E-12 (small) socket base, 60 Watt
rating. Example: GE 60BC or
Philips 60CTC.
Do not exceed 60 Watts per
bulb.
To access the lower light bulb
area:
slide fireplace out of mantel. 1.
Trim
Front Glass
Log Set Assembly
Figure 7
upper Light Bracket
Lower Bulbs
Upper Bulbs