Echo Bear Cat 70580 v.1 - Manual (Page 8)

3 INCH CHIPPER/SHREDDERS
6
SAFETY
1.8 SafeTY decalS
dO NOT OPERATE mACHINE WITHOuT sHIELds IN PLACE.
FAILuRE TO dO sO mAy CAusE sERIOus INjuRy OR
dEATH.
P/n 12174
P/n 12171
kEEP HANds ANd FEET OuT OF INLET ANd dIsCHARgE
OPENINgs WHILE mACHINE Is OPERATINg TO AvOId
sERIOus PERsONAL INjuRy. sTOP ANd ALLOW mACHINE
TO COmE TO A COmPLETE sTOP BEFORE CLEARINg
OBsTRuCTIONs.
dO NOT INsERT BRANCHEs LARgER THAN 3/4 INCH INTO
sHREddER OR mACHINE dAmAgE mAy OCCuR.
P/n 12176
CHECk BLAdE BOLTs FOR PROPER TORQuE AFTER
EvERy 8 HOuRs OF OPERATION. CHECk BLAdEs ANd
ROTATE OR REsHARPEN dAILy OR As REQuIREd TO
kEEP BLAdEs sHARP. REFER TO OWNERs mANuAL FOR
INsTRuCTIONs. FAILuRE TO dO sO mAy CAusE POOR
PERFORmANCE, dAmAgE OR PERsONAL INjuRy ANd
WILL vOId THE mACHINE WARRANTy.
P/n 12250
kEEP HANds ANd FEET OuT OF INLET ANd dIsCHARgE
OPENINgs WHILE mACHINE Is OPERATINg TO AvOId
sERIOus PERsONAL INjuRy. sTOP ANd ALLOW mACHINE
TO COmE TO A COmPLETE sTOP BEFORE CLEARINg
OBsTRuCTIONs.
P/n 12175
2
3
4
P/n 14942-00
1
5
6
see section 1.9 for decal locations. Familiarize yourself with all of the safety and operating decals on the machine and the associated
hazards. see the engine owners manual or contact the engine manufacturer for engine safety instructions and decals. make certain
that all safety and operational decals on this machine are kept clean and in good condition. The decals are shown below at reduced
sizes. Refer to the parts catalog if you need a replacement decal. decals that need replacement must be applied to their original
locations.