Echo Bear Cat 73554 - Manual (Page 29)

Page 26 Bearcat Chipper Shredder Operator’s Manual
Service & Maintenance
PTO DRIVELINE LUBRICATION
1. Every 8 hours, lubricate PTO cross journals. Make sure
grease purges through all four bearings. (See Fig. # 9).
2. Every 8 hours, lubricate PTO inner tubes. Telescoping
members must have lubrication to operate successfully.
Telescoping members without fittings should be pulled
apart and grease should be added manually with a brush.
(See Fig. # 9).
8 h h 8
8 h
h 8 8 h
Fig. # 9 Lubricate PTO driveline
WARNING
To prevent personal injury or property damage: Discon-
nect the PTO driveline from the source providing power
or disconnect the driveline from the chipper and make
sure that all moving parts have come to a complete stop,
before servicing, adjusting or repairing.
3. Every 8 hours, lubricate the PTO shield retaining bear-
ing. Molded nipples on the guard near each guard bear-
ing are intended as grease fittings and should be lubri-
cated every 8 hours of operation! (See Fig. # 9).