Drake PEG-NE24 Encoder - Manual (Page 20)

20 937.746.4556 | www.rldrake.com
Admin Screen
To change/modify the IP network parameters, as well as the Username and Password values for the unit, you must be
logged in to the unit as “Admin” to access a hidden screen shown in image below. At the top right of the screen select
Logged in as:
admin
Admin Username: is the Administrator’s login (10 characters maximum). This login allows the user to make
changes to any area of the unit. The factory default Login is “ admin”. Login is case sensitive.
Current Password: is the Administrator’s Current Password (10 characters maximum). The factory default
password is “ pass”. Password is case sensitive and will not be displayed.
New Password: used only if the user wants to change the current Administrator’s password. Must enter a new
password (10 characters maximum). Password is case sensitive and will not be displayed.
Confirm Password: must enter the same password as entered in 3 above. If password doesn't match, an error
will be displayed.
Guest Username: is the Guest login (10 characters maximum). This login allows the user to view the unit settings
but does not allow any changes. The factory default Guest Login is “ guest”. Login is case sensitive.
Current Password: is the Current Guest Password (10 characters maximum). The factory default Guest
password is “ pass”. Password is case sensitive and will not be displayed.
New Password: used only if the user wants to change the current Guest password. Must enter a new password
(10 characters maximum). Password is case sensitive and will not be displayed.
Confirm Password: must enter the same password as entered in 7 above. If password doesn't match, an error
will be displayed.
1
2
3
4
5
6
1
2
3
4
5
6
7
8
7
8