DR Power Backhoe 2008 - Manual (Page 38)

34 DR ®
DIRT BOSS™ TOWABLE BACKHOE
End of Season and Storage
• Coat the exposed piston rods of all hydraulic cylinders with a grease or corrosion preventative.
• Lubricate all grease fittings (See page 32).
• Clean the exterior of the unit to remove all dirt, grease, and any other foreign material. To prevent
rust, touch up painted surfaces that have been scratched or chipped.
• If possible, store the Backhoe in a dry, protected place. If it is necessary to store the Backhoe
outside, cover it with a protective material (especially the Engine and Seat).
CENTER THE BOOM. RETRACT THE BOOM, CROWD ARM AND BUCKET. INSTALL THE BOOM HITCH
PINS AND LYNCH PINS TO LOCK THE BOOM IN PLACE. SHUT DOWN THE ENGINE, REMOVE THE
SPARK PLUG WIRE AND WAIT 5 MINUTES BEFORE PERFORMING ANY MAINTENANCE PROCEDURE
OR INSPECTION ON THE BACKHOE.