DR Power VT1 (1-ton) (Feb 2012 - Present) - Manual (Page 19)

CONTACT US AT www.DRpower.com 19
Inserting the Log Hauling Extenders
NOTE: If you wish to use the Trailer in the Log Hauling configuration initially,
please follow these steps, if not please skip to the next section that covers
installing the Dump Bed.
1. Insert the Log Cradles (Figure 43), with the angled portion of the Cradles
facing outwards.
2. Insert the Log Cradle Extensions by first passing the Chain through the
Square opening(s) of the Log Cradles (Figure 43).
3. Install the Log Cradle Extension Caps (Figure 43).
Figure 41
Safety Snap Pin
Lever Down to
Lock on Ball
Jack in Tow Position
Figure 42
Stabilizer(s) in
Tow Position
Log
Cradle(s)
Extension(s)
Cap(s)
Figure 43