DR Power TPH-184CHP - Manual (Page 11)

STEP III – ATTACHING THE SHREDDER HOPPER
• To attach the shredder hopper, push the four vibration dampeners (item #28) up into the mount holes on the
hopper.
• With the vibration dampeners in the hopper mount holes from step 1, place the hopper on top of the unit. NOTE:
the slanted side of the hopper faces the discharge end of the shredder/chipper. Align the holes in the side plates
with the vibration dampeners.
• Push the four bolts up through the side plates and thread them into each vibration dampener until one or two
threads appear. Put the locknuts in place on top of the bolts coming up through the vibration dampeners. Hold the
locknut with a wrench and tighten the bolt until two threads are completely through the nut. DO NOT OVER
TIGHTEN AS THIS WILL DAMAGE THE VIBRATION DAMPENER AND POSSIBLY LEAD TO FURTHER
DAMAGE TO YOUR MACHINE.
11