beautypg.com

Installing and removing the edger, Before installing the accessories – DR Power Power Take-Off (PTO) System User Manual

Page 12

background image

Before Installing the Accessories

Each attachment has two slots in the axle that ends in a J feature. The shafts that install on the side of
the transmission marked with an R have a semi-circular notch in the end of the shaft by the slot. The
shafts that install on the side of the transmission marked with an L do not have this notch (Figure 6).

Figure 6

Notch
(4 places)

J-Shaped Slot

Right side attachment

J-Shaped Slot

No notches

Left side attachment


THE ACCESSORIES HAVE CAPS ON THE OUTSIDE ENDS: A RED CAP ON THE RIGHT AND A BLACK CAP
ON THE LEFT. BE SURE TO INSTALL THE RED-CAPPED END ON THE RIGHT SIDE OF THE
TRANSMISSION AND THE BLACK-CAPPED END ON THE LEFT SIDE OF THE TRANSMISSION.
INSTALLING THE ACCESSORY INCORRECTLY CAN CAUSE THE ATTACHMENT TO COME OFF DURING
OPERATION.

8 DR

®

TRIMMER/MOWER™ GEAR-DRIVEN POWER TAKE-OFF SYSTEM™