Digi-Star TCX-1000 SERIES - Manual (Page 29)

D3556 05/29/03 REV. 2.2 Copyright 2001
29
Lit=1.0 Backlight 1 minute
Lit=2.0 Backlight 2 minutes
Lit=5.0 Backlight 5 minutes
1st Security Code SC1=00 Code Disabled 00 00 00
SC1=xx xx = 01 to 99 : Set security
Code #1
2 nd Security Code SC2=00 Code Disabled 00 00 00
SC2=xx xx = 01 to 99 : Set Security
Code #2
Note: Be sure to record both Security Codes somewhere for safekeeping. If they are lost the
indicator will have to be returned to the factory to have the codes reset to 00. After pressing the
enter key to enter the last configuration menu step, the display will show SEtPntS.
D. SETPOINT SETUP
With the display showing SetPntS, press the Enter key to display the current setpoint #1 Mode, or
repeat ESC to cycle through the calibration menus.
Display Step
S1:__ SETPOINT #1 MODE
S2:__ SETPOINT #2 MODE
S3:__ SETPOINT #3 MODE
S4:__ SETPOINT #4 MODE
S5:__ SETPOINT #5 MODE
S6:__ SETPOINT #6 MODE
S7:__ SETPOINT #7 MODE
S8:__ SETPOINT #8 MODE
Codes for setpoint Values
Display Legal Values
oFF Setpoint Disabled
grHi Setpoint Gross Weight High
ntHi Setpoint Net Weight High
grLo Setpoint Gross Weight Low
ntLo Setpoint Net Weight Low
drib Setpoint acts as dribble