Denon 1083 - Manual (Page 31)

31
Setting the Trigger Out Setup
• Sets the Trigger Out output for the different input sources.
1
2
3
4
At the System Setup Menu select “Trigger Out Setup”.
Switch to the Trigger Out Setup screen.
Select the input source and select “ON” or “OFF”.
Enter the setting.
The System Setup Menu reappears.
Auto Tuner Presets
Use this to automatically search for FM broadcasts and store up to 40 stations at preset channels A1 to 8, B1 to 8, C1 to 8, D1 to 8 and E1 to 8.
NOTE:
• If an FM station cannot be preset automatically due to poor reception, use the “Manual tuning” operation to tune in the station, then preset it
using the manual “Preset memory” operation.
1 At the System Setup Menu select “Auto Tuner Presets”.
2 Switch to the Auto Preset Memory screen.