Denon 1083 - Manual (Page 17)

17
System setup Default settings
Auto Tuner
Presets
FM stations are received automatically and stored in the memory.
A1 ~ A8
B1 ~ B8
C1 ~ C8
D1 ~ D8
E1 ~ E8
87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz
520/600/1000/1400/1500/1710 kHz, 90.1/90.1 MHz
90.1 MHz
90.1 MHz
90.1 MHz
!3
!4 Setup Lock
Set whether or not to lock the system setup settings so that they
cannot be changed.
Setup Lock = OFF
• Speaker system layout
Basic system layout
• The following is an example of the basic layout for a system consisting of eight speaker systems and a television monitor:
With the AVR-3803/1083 it is also possible to use the surround speaker selector function to choose the best layout for a variety of sources and
surround modes.
Subwoofer Center speaker system
Surround speaker systems
Surround back speaker systems
Front speaker systems
Set these at the sides of the TV or screen with
their front surfaces as flush with the front of the
screen as possible.
• Surround speaker selector function
This function makes it possible to achieve the optimum sound
fields for different sources by switching between two systems of
surround speakers (A and B).
A A
B B
A A
B B
SB SB SB SB
Using A only Using B only
SB: SURROUND BACK SPEAKER
NOTES:
• The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback of a video component. For example, if the TV monitor
is connected to both the AVR-3803/1083’s S-Video and video monitor output jacks and signals are input to the AVR-3803/1083 from a video source (VDP, etc.)
connected to both the S-Video and video input jacks, the on-screen display signals are output with priority to the S-Video monitor output. If you wish to output
the signals to the video monitor output jack, do not connect a cord to the S-VIDEO MONITOR OUT jack. (For details, see page 33.)
• The AVR-3803/1083’s on-screen display function is designed for use with high resolution monitor TVs, so it may be difficult to read small characters on TVs with
small screens or low resolutions.
• The setup menu is not displayed when headphones are being used.
Trigger Out
Setup
Set the Trigger Out output for the different input sources.
PHONO CD TUNER CDR/TAPE DVD VDP TV VCR-1
OFF OFF OFF OFF ON ON ON ON
!2
VCR-2
ON
DBS
ON
V. AUX
ON