Denon 1083 - Manual (Page 30)

30
2 Select “ON” if you want to use the auto surround mode, “OFF” if you
do not want to use it.
3 Enter the setting.
The System Setup Menu reappears.
Setting the On Screen Display (OSD)
• Use this to turn the on-screen display (messages other than the menu screens) on or off.
• Sets the on-screen display’s display mode.
Mode 1: Prevents flickering of the on-screen display when there is no video signal.
Mode 2: Flickering is not prevented.
Use this mode if the on-screen display does not appear in the mode 1, as may happen according to the TV being used.
1 At the System Setup Menu select “On Screen Display”
and press the ENTER button.
2
3
Select “ON” or “OFF”.
Select the On Screen Display mode and select
“Mode1” or “Mode2”.
4 Enter the setting.
The System Setup Menu reappears.