Digi-Star SW2600EID - Manual (Page 31)

Operators Manual
D3718 31
WEIGH METHODS
Select weigh method #4 for animal weighing. EID features require indicator
set in this mode. Use StockWeigh for stable loads, Lock-On Weigh
method. Other methods listed below.
NOTE:
Most of StockWeigh features require weigh method #4.
General Weigh Method #1
All purpose weigh method for stable loads.
Slow Weigh Method #2
Higher accuracy for weighing stable loads.
Fast Weigh Method #3
Determines new weight quickly when weighing stable loads.
Lock-on Weigh Method #4
Weighing active animals and displays stable accurate weight. Set to “OFF”
for weighing stable weights. Lock-On sensitivity can be adjusted using
“LOCKON” menu.
Once weight displayed, scale “Locks-On” to weight. Weight does not
change, even if motion never stops. Small ‘L’ appears on left side of the
display indicating weight “Locked-On.” Animal’s weight must be greater
than 2.5% of scales “capacity” weight before system “Lock-On.”
Break lock, 50% of displayed weight added or removed from scale.
“Locked-On” weight can be “rechecked” by pressing . This breaks “lock”
and scale recalculates weight.