Digi-Star SW2600EID - Manual (Page 29)

Operators Manual
D3718 29
EID READER – OPTIONAL
NOTES : The StockWeigh connects to Allflex™ ISO Compatible RFID Stick
Readers only. Do not attempt to use with other RFID readers or
peripherals that are not approved by Digi-Star. DAMAGE MAY
OCCUR.
The Allfex™ Stick Reader reconfigures output format if the button
is depressed while powering “ON”. Be careful not to lay stick
reader with button down while applying power.
The Allflex250™ Stick Reader gets its power from StockWeigh
“EID Reader” port and does not use external power cube. Allflex
320 reader uses batteries in handle
If problem with Allflex™ RFID Stick Reader or number of
characters it is transmitting, follow procedure below to re-configure
stick reader to TIRIS S2000 output format.
Refer to Allflex
™
RFID Stick Reader manual for details.