Digi-Star EZ 3600V Manual USB - Manual (Page 7)

Overview weighing indicator
D3715-GB Rev E EZ3600 User's manual 4
OVERVIEW WEIGHING INDICATOR
1. – press and hold for 3 seconds to zero balance the weighing indicator.
2. Warning light pre-alarm – light flashes and alarm sounds when weight is within preset limit.
3. – to hold displayed weight when moving the machine.
4. – to set mixing time
5. – to switch on weighing indicator . Press this key while the weighing indicator is on to run
the self test.
6. – to switch off weighing indicator.
7. Display – to display actual values and settings.
8. – to temporarily zero the weighing indicator [Net mode].
9. – to register or print the displayed weight.
10. – to toggle between net and gross weights.
11. – to select recipes.
12. – to enter user and feed cycle numbers. Any user number can be entered as long as this
number has not been assigned by the management software.
1 2 3 4 5 6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
>>See pages 36, 37 and 38 for installation instructions.