Drive ratio, Weighing indicator id / feed mixer id – Digi-Star EZ 3600V Manual USB User Manual
Page 31

Commonly used direct access numbers
D3715-GB Rev E EZ3600 User's manual
28
Automatically advancing to next ingredient / Manually advancing to next group
[
MANPEN]
Automatically advancing to next ingredient; manually advancing to next group.
1. Enter 461.
2. Press .
3. Press to select
ON or OFF.
4. Press .
Drive ratio
[
DRATIO]
Drive ratio is the number of revolutions of the power take-off of the feed mixer divided by the
number of revolutions of the mixer in the feed mixer.
1. Enter 422.
2. Press .
3. Enter the required drive ratio.
4. Press .
Weighing indicator ID / feed mixer ID
[
SCALEID]
Each weighing indicator has a unique ID number.
1. Enter 108.
2. Press .
3. Press to delete the old ID number.
Enter the new ID number.
4. Press .
Note: The TMR Tracker software ID number
must correspond with the ID number of the feed
mixer.
1
2
3
4
422
1
2
3
4
108
3
1
2
3
4
461