Commonly used direct access numbers, Pre-alarm, Automatically advancing ingredients – Digi-Star EZ 3600V Manual USB User Manual
Page 29: Tolerance

Commonly used direct access numbers
D3715-GB Rev E EZ3600 User's manual
26
COMMONLY USED DIRECT ACCESS NUMBERS
Pre-alarm
[
P-ALM]
Message when the preset amount to be loaded is almost reached.
1. Enter 401.
2. Press .
3. Press again to select
WEIGHT or PERCNT.
4. Press .
5. Enter the pre-alarm value in weight or
percent.
6. Press .
Automatically advancing ingredients
When automatically advancing to next ingredient, the weighing indicator will automatically advance
to the next ingredient as soon as the current ingredient has been loaded, taking the set tolerance
and delay time into account.
Tolerance
[
TOLER]
Tolerance is a percentage of the desired ingredient amount. When reaching the Desired amount
minus Tolerance, the weighing indicator will accept the loaded amount and automatically advance
to the next ingredient, depending on the delay time.
1. Enter 442.
2. Press .
3. Press , until the desired percentage
(tolerance) appears on the display:
OFF, 0.5, 1 - 5, 7, or 10.
4. Press .
1/5
2/3
4/6
401
1
2/3
4
442