Digi-Star Moisture Tracker - Manual (Page 14)

14 Moisture Tracker TM Operators Manual D3973 Rev C
See Notes below.
Press Trigger or
Number of trigger presses neces-
sary for a moisture measurement
is controlled by the Set Measure-
ment Count screen. Default is 20.
Results are displayed and infor-
mation stored in USB drive for
later uploading to PC. Press any
key will return to the ingredient
screen.
Note: The previous days DM
measurement (if available) will
show below the ingredient.
Notes on Taking Moisture Measurements
• USB Drive must be in device to save measurements.
• Prior to taking first measurement, ensure probe grating is in
place and free of debris interfering with light transmission.
• Press probe head into ingredient using moderate pressure to
make uniform contact with probe grating.
• Watch Video on Digi-Star.com or contact Dig-Star technical
support for addition information on taking moisture measure-
ments.
Trigger pulls are counted and
screen displays ingredient being
measured. In this case, corn
silage.