Diamondback 500ER - Manual (Page 10)

10
7. Parts G2, G3, G4, G5 and G6 will arrive
from pre‐assembled on the unit. Remove
the four (4) hex bolts (G5) from the lower
console mast front cover (G6) and set
aside. Remove hex bolt G2 from the right
side and set aside with the two (2) G1 hex
bolts already set aside.
8. Gather the left (G3) and right (G4) lower
console mast covers and bring together as
a clamshell over the console mast/main
frame union. Align covers with the
mounting holes in the main frame and
loosely thread the two (2) G1 hex bolts
into place. Loosely install hex bolt G2
through the plastic cover G4 and into
cover G3.
9. Install the lower console mast front cover
(G6) by threading the four (4) hex bolts
(G5) through the face and into parts G3
and G4. Do not over‐tighten.
10. Tighten hex bolts G1 and G2. Do not over‐
tighten and be aware of improper
alignment as the plastic parts come
together.