DFI RL830-C602/C604 - Manual (Page 20)

www.dfi.com
20
Chapter 2 Hardware Installation
Chapter 2
RJ45 LAN Ports
Features
• Intel ® 82580 PCI Express Gigabit Ethernet controller
The four LAN ports allow the system board to connect to a local area network by means of a
network hub.
BIOS Setting
Configure the onboard LAN ports in the Advanced menu of the BIOS. Refer to the chapter 3
for more information.
Driver Installation
Install the LAN drivers. Refer to the chapter 4 for more information.
LAN 1
LAN 0
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB ports, the
+5V_standby power source of your power supply must support ≥1.5A. For 3 or more
USB ports, the +5V_standby power source of your power supply must support ≥2A.
Driver Installation
You may need to install the proper drivers in your system operation to use the USB device.
Refer to your operating system’s manual or documentation for more information.
Wake-On-USB Keyboard/Mouse
The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or USB mouse
to wake up a system from the S3 (STR - Suspend To RAM) state. To use this function:
• Jumper Setting
JP3, JP4, JP5 and JP6 must be set to “2-3 On: +5V_standby”. Refer to “USB Power Select” in
this chapter for more information.
R227 U19 C170 7 6
R227 U19 C170 7 6
LAN 2-3
LAN 1 LAN 0
LAN 3
LAN 2