F6 floppy – DFI MB630-CRM User Manual

Page 114

114

Supported Software

F6 Floppy

This is used to create a fl oppy driver diskette needed when you install Windows

XP using the F6 installation method. This will allow you to install the operating
system onto a hard drive when in AHCI mode.

1. Insert a blank fl oppy diskette.

2. Locate for the drivers in the CD then copy them to the fl oppy diskette. The

CD includes drivers for both 32-bit and 64-bit operating systems. The path to
the drivers are shown below.

32-bit
CD

Drive:\AHCI_RAID\F6FLOPPY\f6fl py32

64-bit
CD

Drive:\AHCI_RAID\F6FLOPPY\f6fl py64

This manual is related to the following products: