DFI HD332-H81 - Manual (Page 45)

www.dfi .com
45
Chapter 3 BIOS Setup
Chapter 3
PCH-IO Configuration
This section illustrates the PCH parameters.
Onboard 82574 LAN Controller
Enables or disables the onboard 82574 LAN controller.
Onboard NEC USB 3.0 Controller
Enables or disables the USB 3.0 controller.
High Precision Timer
Enables or disables the High Precision Event Timer.
PCI Express Confi guration
settings.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Intel PCH RC Version
Intel PCH SKU Name
Intel PCH Rev ID
 PCI Express Confi guration
 USB Confi guration
 PCH Azalia Confi guration
Onboard 82574 LAN 2 Controller
Onboard 82574 LAN 1 Controller
Onboard NEC USB 3.0 Controller
High Precision Event Timer Confi guration
High Precision Timer
1.5.0.0
H81
05/C2
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Chipset
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
PCI Express Configuration
This field is used to configure the PCI Express settings.
PCI Express Root Port 5 and 6
Enables or disables the PCI Express Root Port 5 and 6.
NEC USB 3.0 Port 3, 4.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
PCI Express Confi guration
PCIe Port 2 is assigned to USB 3.0
PCIe Port 3 is assigned to LAN.
PCIe Port 4 is assigned to LAN.
 PCI Express Root Port 5
 PCI Express Root Port 6
Chipset
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
PCIe Speed
Selects the speed of PCI Express port: Auto, Gen 1 or Gen 2.
Control the PCI Express
Root Port.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
PCI Express Root Port 5
PCIe Speed
Chipset
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
[Enabled]
[Auto]