Chapter 3 – DFI HD332-H81 User Manual

Page 37

www.dfi .com

Chapter 3 BIOS Setup

Chapter 3

PC Health Status

This section displays the hardware health monitor.

PC Health Status



Smart Fan Function

Case Open

CPU

Temperature

System

Temperature

CPU Fan Speed
System Fan Speed
VCore
+5V
+12V
+1.5V
+3.3V
3VSB
VBAT

Advanced

[Disabled]

: +26.5 C
: +32.0 C
: 4411 RPM
: N/A
: +1.744 V
: +5.077 V
: +12.232 V
: +1.504 V
: +3.392 V
: +3.392 V
: +3.072 V

Smart Fan Function

Smart Fan Function
Setting



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

F4: Save and Reset
ESC: Exit

Advanced



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

F4: Save & Reset
ESC: Exit

Smart Fan Function

CPU Smart Fan Control

Boundary 4
Boundary 3
Boundary 2
Boundary 1
Speed Count 5
Speed Count 4
Speed Count 3
Speed Count 2
Speed Count 1

System Smart Fan Control
Boundary 3
Boundary 2
Boundary 1
Speed Count 5
Speed Count 4
Speed Count 3
Speed Count 2
Speed Count 1

[Enabled]

60
50
40
30
100
75
50
40
30

[Enabled]
60
50
40
30
100
75
50
40
30

Enable CPU Smart Fan

Enable or Disable Parallel
Port (LPT/LPTE).

Parallel Port Confi guration

Parallel Port

Change Settings
Device Mode

Advanced

[Enabled]

[Auto]
[STD Printer Mode]

Serial Port

Enables or disables these serial ports (COM).

Change Settings

Selects the IO/IRQ settings for the super I/O device.

RS485 Auto Flow

Enables or disables the serial port 10 RS485 auto flow.

Parallel Port Configuration

Sets parameters of Parallel port (LPT/LPE).



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

F4: Save and Reset
ESC: Exit

Parallel Port

Enables or disables the parallel port (LPT/LPTE).

Change Settings

Selects the IO setting for the super I/O device.

Device Mode

Selects the mode for the printer port.