DFI HD332-H81 - Manual (Page 16)

www.dfi .com
16
Chapter 2 Hardware Installation
Chapter 2
JP5, JP6, JP8 and JP15 are used to select the power of the USB devices. Selecting +5V_stand-
by will allow you to use a USB device to wake up the system.
USB Power Select
USB 2-3/8/10-11
(JP8)
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB ports, the
+5V_standby power source of your power supply must support ≥1.5A. For 3 or more
USB ports, the +5V_standby power source of your power supply must support ≥2A.
Power-on Select
USB 3-4
(JP6)
USB 1-2
(JP5)
1
3
2
1
3
2
2-3 On:
+5V_standby
1-2 On: +5V
(default)
3 1 2
3 1 2
JP10 is used to select the method of powering on the system. If you want to use the power
button, set pins 1 and 2 to On.
To power-on via WOL after G3:
1. Set JP10 pins 2 and 3 to On.
2. Set the “Wakeup Event After G3” field to Enable.
To power-on via AC Power:
1. Set JP10 pins 2 and 3 to On.
2. Set the “Wakeup Event After G3” field to Disable.
1-2 On:
Power-on via power button
(default)
2-3 On:
Power-on via AC power;
Power-on via WOL after G3
4-6 On:
+5V_standby
2-4 On: +5V
(default)
USB 4-5
(JP15)
COM2 COM1
6
1 3 5
2 4
COM2 COM1
JP10
6
1 3 5
2 4