DFI NP102-N16C - Manual (Page 68)

68
3
BIOS Setup
Phoenix - AwardBIOS CMOS Setup Utility
Onboard Device
Item Help
Menu Level

↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Onboard LAN1 Control
Onboard LAN2 Control
Onboard PXE ROM Control
Azalia Audio Control

USB Device Setting
Enabled
Enabled
Disabled
Enabled
Press Enter
Onboard Device
Move the cursor to this field and press . The following screen will appear.
Onboard LAN1 Control and Onboard LAN2 Control
These fields are used to enable or disable the onboard LAN controllers.
Onboard PXE ROM Control
Enable this field if you wish to use the boot ROM (instead of a disk drive) to
boot-up the system and access the local area network directly. If you wish to
change the boot ROM’s settings, type the and keys simulta-
neously when prompted during boot-up. Take note: you will be able to access
the boot ROM’s program (by typing + ) only when this field is
enabled.
Azalia Audio Control
Enabled
Enables the onboard Azalia CODEC.
Disabled
Disables the onboard audio. Disable the onboard audio when using an audio
PCI card.
The settings on the screen are for reference only. Your version may not be identical to
this one.