beautypg.com

Chapter 3 – DFI SB102-D User Manual

Page 42

background image

www.dfi .com

42

Chapter 3 BIOS Setup

Chapter 3

Primary Display

Auto

When the system boots, it will auto detects the display device.

IGFX

When the system boots, it will fi rst initialize the onboard VGA.

PEG

When the system boots, it will fi rst initialize the PCI Express x16 graphics

card.

Internal Graphics

Keep IGD enabled based on the setup options.

DVMT Pre-Allocated

Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphics

Device.

DVMT Total Gfx Mem

This field is used to select the graphics memory size used by DVMT mode.

Graphics Configuration

Select which of IGFX/
PEG/PCI Graphics device
should be primary delay
or select SG for switch-
able Gfx.

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.

Graphics Confi guration
IGFX VBIOS Version
IGfx Frequency

Primary Display

Internal Graphics

DVMT Pre-Allocated

DVMT Total Gfx Mem

LCD Control

2137
350 MHz

[Auto]

[Auto]
[64M]
[256M]

Chipset



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

ESC: Exit

LCD Control

Select the Video Device
which will be activated
during POST. This has no
effect if external graphics
present.
Secondary boot display
selection will appear based
on your selection.
VGA modes will be sup-
ported only on primary
display.

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.

LCD Control

Primary IGFX Boot Display

SDVO-LFP Panel Type

[VBIOS Default]

[1280x1024 48bit]

Chipset



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

ESC: Exit

Primary IGFX Boot Display

The options are VBIOS Default, CRT, EFP2, LFP, EFP.

SDVO-LFP Panel Type

Select SDVO panel used by the internal graphics device by selecting the ap-

propriate setup item.

NB PCIe Configuration

Confi gure PEG B0:D1:F0
Gen1-Gen3.

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.

NB PCIe Confi guration
PEG

PEG-Gen X

Enable PEG

Not Present

[Gen1]

[Enabled]

Chipset



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

ESC: Exit

Note:

EFP2 means HDMI, LFP means LVDS and EFP means DVI.