DFI HR100-CRM - Manual (Page 78)

78
3
BIOS Setup
GTT Size
Selects the GTT Size. The options are 1MB and 2 MB.
Aperture Size
This fi eld is relevant to the memory-mapped graphics data of the AGP card
installed in your system. Leave this in its default setting.
DVMT Total Gfx Mem
This fi eld is used to select the graphics memory size used by DVMT mode.
LCD Control
Select the Video Device
which will be activated
during POST. This has no
effect if external graphics
present.
Secondary boot display
selection will appear based
on your selection.
VGA modes will be sup-
ported only on primary
display.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
LCD Control
Primary IGFX Boot Display
Secondary IGFX Boot Display
LCD Panel Type
[CRT]
[Disabled]
[VBIOS Default]
Chipset
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Primary IGFX Boot Display and Secondary IGFX Boot Display
The options are Disabled, CRT, EFP, LFP, EFP3 and EFP2.
LCD Panel Type
This fi eld is used to select the type of LCD panel used by the internal graph-
ics device.