DFI HR100-CRM User Manual
Page 19
19
2
Hardware Installation
CPU
Overview
The system board is equipped with a surface mount PGA 988B CPU socket.
Note:
The system board used in the following illustrations may not resemble
the actual one. These illustrations are for reference only.
Installing the CPU
1. Make sure the PC and all other peripheral devices connected to it has been
powered down.
2. Disconnect all power cords and cables.
3. Locate the PGA 988B sock-
et on the system board.
4. Make sure the screw is in
its unlock position. If it’s
not, use a screwdriver to
turn the screw to its un-
lock position.
Lock
Unlock