DFI G5C100-NR - Manual (Page 72)

7 2
3
BIOS Setup
Delay Prior To Thermal
This field is used to select the time that would force the CPU to a
50% duty cycle when it exceeds its maximum operating temperature
therefore protecting the CPU and the system board from overheat-
ing to ensure a safe computing environment..
Thermal Management
Select a “thermal monitor” in this field to enable the CPU’s
speedstep function. Restart the system then go to the operating
system’s “Control Panel”. Double-click “Power Options”. The “Power
Options Properties” dialog box will appear. In the “Power Schemes”
menu, select “Portable/Laptop”. Speedstep reduces the CPU’s fre-
quency and voltage in accordance to its load.
Thermal Monitor 1 On die throtting.
Thermal Monitor 2 Ratio and VID transition.
Execute Disable Bit
When this field is set to Disabled, it will force the XD feature flag to
always return to 0.
CPU Feature
This field is used to configure the CPU that is installed on the sys-
tem board. Move the cursor to this field then press .
The settings on the screen are for reference only. Your version may not be
identical to this one.
Phoenix - AwardBIOS CMOS Setup Utility
CPU Feature
Item Help
Menu Level XX
↑↓ : Move PU/PD/+/-: Change Priority F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Delay Prior to Thermal
Thermal Management
Execute Disable Bit 16 Min
Thermal Monitor 1
Enabled