DFI G5C100-NR - Manual (Page 126)

126
4
Supported Software
Creating an AHCI/RAID Driver Floppy Diskette under Vista
The system board package includes floppy diskettes which are needed
when you install the AHCI/RAID driver during Windows Vista installation. If
in any case you lost the diskettes, you can create another one by following
the steps below.
1. Insert the provided CD into a CD-ROM drive.
2. The execution files are located in:
drive:>\AHCI_RAID\F6FLOPPY
3. Run f6flpy32.exe (for 32-bit system) or f6flpy64.exe (for 64-bit
system).
4. Insert a blank floppy diskette then click OK.
5. The system will format and write the necessary driver files into the
diskette.