DFI BT101 - Manual (Page 13)

www.dfi .com
13
Chapter 2 Hardware Installation
Chapter 2
JP3, JP4, JP5 and JP10 are used to select the power of the USB ports. Selecting +5V_standby
will allow you to use a USB device to wake up the system.
USB Power Select
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB ports, the
+5V_standby power source of your power supply must support ≥1.5A. For 3 or more
USB ports, the +5V_standby power source of your power supply must support ≥2A.
2-3 On:
+5V_standby
1-2 On: +5V
(default)
1
3
2
1
3
2
USB 0-1
(JP4)
USB 3
(JP3)
3 1 2 3 1 2
1-2 On: +5V
(default)
2-3 On:
+5V_standby
USB 4-5
(JP5)
USB 6-7
(JP10)
PS/2 Keyboard/Mouse Power Select
JP6
2-3 On: +5V_standby
1-2 On: +5V (default)
1 3 2
1 3 2
JP6 is used to select the power of the PS/2 keyboard/mouse port. Selecting +5V_standby
will allow you to use the PS/2 keyboard or PS/2 mouse to wake up the system.
Important:
The +5VSB power source of your power supply must support ≥720mA.