beautypg.com

Chapter 1 - introduction, Specifications, Introduction – DFI BL100-NE/-PE User Manual

Page 8

background image

Introduction

1

8

Processor

Chipset

System Memory

Expansion Slots

Graphics

Audio

LAN

Serial ATA

Chapter 1 - Introduction

Specifications

• LGA 775 socket for:

- Intel

®

Core

TM

2 Quad / Intel

®

Core

TM

2 Duo

- Intel

®

Wolfdale 45nm processors

• Supports Intel Enhanced Memory 64 Technology (EMT64T)
• Supports Enhanced Intel SpeedStep Technology (EIST)
• 1333*/1066/800MHz FSB

*Available on CPUs that support 1333MHz FSB

Note: We recommend using screw with metal pad type of CPU

heat sink and fan.

• Intel

®

chipset

- Intel

®

Q35 Express chipset

- Intel

®

ICH9 I/O Controller Hub

• One 240-pin DDR2 DIMM socket
• Supports 667MHz and 800MHz DDR2 SDRAM
• Supports maximum of 4GB system memory using 512Mbit or

1Gbit technology for x8 and x16 devices
*ECC DDR2 DIMMs are not supported

• 1 PCI slot

• Integrated Intel GMA3100

- Up to 384MB maximum video memory
- 2048x1536 at 75 Hz maximum resolution

• LVDS interface (BL100-N and BL100-P only)

- Panel support up to UXGA (1600x1200)
- LVDS 18-bit or 24-bit output through SDVO interface
- Single/dual LVDS transmitter up to 165M pixels/s
Note: The default BIOS does not support LVDS. Please request

for a customized BIOS to support LCD panel using the
LVDS interface.

• Realtek ALC662 High Definition audio CODEC
• Six channel DAC suppor ts 16/20/24-bit PCM format for 5.1

channel audio solution

• All DAC support independent 44.1k/48k/96kHz sample rate
• All ADC support independent 44.1k/48k/96kHz sample rate

• One Realtek RTL8111C PCI Express Gigabit controller

(BL100-P and BL100-PE only)

• Two Realtek RTL8111C PCI Express Gigabit controllers

(BL100-N and BL100-NE only)

• Supports 10Mbps, 100Mbps and 1Gbps data transmission
• IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) compliant

• Suppor ts 4 SATA (Ser ial ATA) interfaces which are

compliant with SATA 1.0 specification

• SATA speed up to 3Gb/s