DFI BL100-NE/-PE - Manual (Page 46)

46
2
Hardware Installation
Power Connectors
Use a power supply that complies with the ATX12V Power Supply
Design Guide Version 1.1. An ATX12V power supply unit has a
standard 20-pin ATX main power connector that must be inserted
into this connector.
Your power supply unit may come with a 4-pin +12V power
connector. The +12V power enables the delivery of more +12VDC
current to the processor’s Voltage Regulator Module (VRM). Connect
the 4-pin power connector to this connector.
1
2 4
3
Ground
Ground
+12V
+12V
+12V
1 1 1
1 0
3.3V
3.3V
Ground
+5V
Ground
+5V
Ground
PW-OK
5VSB
+5V
3.3V
-12V
Ground
PS-ON
Ground
Ground
Ground
-5V
+5V
2 0
X
X