DFI BL100-NE/-PE - Manual (Page 42)

42
2
Hardware Installation
LVDS LCD Panel Connector and LCD/Inverter Power
Connector (BL100-N and BL100-P only)
The system board allows you to connect a LCD Display Panel by
means of the LVDS LCD panel connector and the LCD/Inverter
power connector. These connectors transmit video signals and power
from the system board to the LCD Display Panel. Refer to the next
page for the pin functions of these connectors.
Jumper Settings
Refer to the “Jumper Settings” section in this chapter for settings
relevant to the LCD panel.
LVDS LCD Panel
1 8
LCD/Inverter
Power
X
1
W