DFI CR960-HM76 - Manual (Page 50)

www.dfi .com Chapter 4 BIOS Setup
50
Chapter 4
Hard Drive BBS Priorities
Sets the order of the legacy devices in this group.
CD/DVD ROM Drive BBS Priorities
This field is used to select the boot sequence of the CD/DVD-ROM drives. Move the
cursor to this field then press . Use the Up or Down arrow keys to select a
device then press <+> to move it up or <-> to move it down the list.
CSM
Controls the execution of
UEFI and Legacy PXE
OpROM.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Launch PXE OpROM policy
Launch Storage OpROM policy
Save & Exit Chipset Advanced Security Main Boot
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
ESC: Exit
[Do not launch]
[Legacy only]
Launch PXE OpROM policy
Control the execution of UEFI and legacy PXE OpROM.
Launch Storage OpROM policy
Control the execution of UEFI and legacy storage OpROM.
Security
Administrator Password
Set the administrator password.
User Password
Set the user password.
HDD0: ST500DM002-1
Set the HDD password.
Set Administrator
Password.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is only
asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will have
Administrator rights.
The password length must be
in the following range:
Minimum length 3
Maximum length 20
Administrator Password
User Password
HDD Security Confi guration:
HDD0: ST500DM002-1
Save & Exit Chipset Advanced Main Boot Security
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
ESC: Exit
Set HDD User Password.
*** Advisable to Power
Cycle System after setting
Hard Disk Passwords **
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
HDD Password Description:
Allows Access to Set, Modify and Clear
HardDisk User and Master Passwods.
User Password need to be installed for
Enabling Security. Master Password can
be modifi ed only when successfully unlocked
with Master password in POST.
HDD PASSWORD CONFIGURATION:
Security Supported
Security Enabled
Security Locked
Security Frozen
HDD User Pwd Status
HDD Master Pwd Status
Set User Password
Save & Exit Chipset Advanced Main Boot Security
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
ESC: Exit
:
:
:
: Yes
No
No
No
NOT INSTALLED
INSTALLED