Chapter 4 – DFI CR960-HM76 User Manual

Page 46

www.dfi .com

Chapter 4 BIOS Setup

Chapter 4

System Agent (SA) Configuration

This section configures System Agent (SA) parameters.

Confi g Graphics Settings.

System Agent Bridge Name
System Agent RC Version
VT-d Capability



Graphics Confi guration



NB PCIe Confi guration



Memory Confi guration

SandyBridge
1.1.0.0
Unsupported

Chipset



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

ESC: Exit

Primary Display

Auto When the system boots, it will auto detects the display device.

IGFX When the system boots, it will first initialize the onboard VGA.

PEG When the system boots, it will first initialize the PCI Express x16 graphics

card.

DVMT Total Gfx Mem

Select DVMT 5.0 total graphics memory size used by the Internal Graphics Device.

Please refer to the screen shown below.

Graphics Configuration

This section is used to configure the graphics settings.

Select which of IGFX/
PEG/PCI Graphics device
should be primary display
or select SG for Switch-
able Gfx.

Graphics Confi guration
IGFX VBIOS Version
IGfx Frequency

Primary Display

DVMT Total Gfx Mem



LCD Control

2132
350 MHz

[Auto]

[256M]

Chipset



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

ESC: Exit

Select DVMT5.0 Total
Graphics Memory size
used by the Internal
Graphics Device.

Graphics Confi guration
IGFX VBIOS Version
IGfx Frequency

Primary Display

DVMT Total Gfx Mem



LCD Control

2132
350 MHz

[Auto]

[256M]

Chipset



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

ESC: Exit

DVMT Total Gfx Mem

128M

256M

MAX

This manual is related to the following products:

CR960-QM77