DFI CR960-HM76 - Manual (Page 38)

www.dfi .com Chapter 4 BIOS Setup
38
Chapter 4
Enable or disable SATA
Device.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
RAID0
RAID1
RAID10
RAID5
Intel Rapid Recovery Technology
OROM UI and BANNER
HDD Unlock
LED Locate
IRRT Only on eSATA
Smart Response Technology
OROM UI Delay
Advanced
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[2 Seconds]
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
ESC: Exit
Software Feature Mask Configuration
AHCI or RAID OROM/RST driver will refer to the SWFM configuration to enable or
disable the storage features.
RAID 0/1/5/10
Enable or disable RAID 0/1/5/10 feature.
Intel Rapid Recovery Technology
Enable or disable Intel Rapid Recovery Technology.
OROM UI and BANNER
If enabled, then the OROM UI is shown. Otherwise, no OROM banner or information
will be displayed if all disks and RAID volumes are Normal.
HDD Unlock
If enabled, it indicates that the HDD password is unlocked in the OS which is enabled.
LED Locate
If enabled, it indicates that the LED/SGPIO hardware is attached and ping to locate
feature on the OS which is enabled.
IRRT Only on eSATA
If enabled, then only IRRT volumes can span internal and eSATA drives . If disabled,
then any RAID volume can span internal and eSATA drives .
Smart Response Technology
Enable or disable Smart Response Technology.
OROM UI Delay
If enabled, it indicates that the delay of the OROM UI splash screen in a normal
status .