Chapter 4 – DFI CR901-B User Manual
Page 35
www.dfi .com
Chapter 4 BIOS Setup
35
Chapter 4
PC Health Status
This section displays hardware health monitor.
CPU Configuration
This section is used to configure the CPU. It will also display the detected CPU
information.
Enabled for Windows XP
and Linux (OS optimized
for Hyper-Threading
Technology) and Disabled
for other OS (OS not
optimized for
Hyper-Threading
Technology). When
Disabled only one thread
per enabled core is
enabled.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
CPU Confi guration
Intel (R) Core (TM) i7-3610QE CPU @ 2.30GHz
CPU Signature
Microcode Patch
Max CPU Speed
Min CPU Speed
CPU Speed
Processor Cores
Intel HT Technology
Intel VT-X Technology
Intel SMX Technology
64 bit
L1 Data Cache
L1 Code Cache
L2 Cache
L3 Cache
Hyper-threading
Active Process Core
Limit CUPID Maximum
Intel Virtualization Technology
Advanced
Hyper-threading
Enable this field for Windows XP and Linux which are optimized for Hyper-Threading
technology. Select disabled for other OSes not optimized for Hyper-Threading tech-
nology. When disabled, only one thread per enabled core is enabled.
Active Process Core
Number of cores to enable in each processor package
Limit CUPID Maximum
The CPUID instruction of some newer CPUs will return a value greater than 3.
The default is Disabled because this problem does not exist in the Windows series
operating systems. If you are using an operating system other than Windows, this
problem may occur. To avoid this problem, enable this field to limit the return value
to 3 or less than 3
.
Intel Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional hardware capa-
bilities provided by Vanderpool Technology.
306a8
7
2300 MHz
1200 MHz
2300 MHz
4
Supported
Supported
Supported
Supported
32 kB x4
32 kB x4
256 kB x4
6144 kB
[Enabled]
[All]
[Disabled]
[Disabled]
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
ESC: Exit
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
System Hardware Monitor
CPU SmartFan
CPU
Temperature
CPU FAN Speed
System FAN Speed
VCore
Vgfs
DDR
+1.05V
CPU
VCCSA
Advanced
[Enabled]
: +60 C
: 4968 RPM
: N/A
: +0.958 V
: N/A
: +1.519 V
: +0.997 V
: +0.859 V
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
ESC: Exit
Enable/ Disable CPU
SmartFan