DFI CR902-B - Manual (Page 43)

www.dfi .com Chapter 4 BIOS Setup
43
Chapter 4
LCD Control
Select the Video Device
which will be activated
during POST. This has no
effect if external graphics
present.
Secondary boot display
selection will appear based
on your selection.
VGA modes will be sup-
ported only on primary
display.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1227. Copyright (C) 2012 American Megatrends, Inc.
LCD Control
Primary IGFX Boot Display
Secondary IGFX Boot Display
LCD Panel Type
Active LFP
[CRT]
[LFP]
[Type 3 1024x768...]
[Int-LVDS]
Chipset
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save and Reset
ESC: Exit
Secondary IGFX Boot Display
Select secondary display device.
LCD Panel Type
Select LCD panel used by Internal Graphics Device by selecting the appropriate
setup item.
Active LFP
Select the active LFP configuration.
No LVDS VBIOS does not enable LVDS.
Int-LVDS VBIOS enables LVDS driver by intergrated encoder.
NB PCIe Configuration
Confi gure PEG0
B0:D1:F0 Gen1-Gen3.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1227. Copyright (C) 2012 American Megatrends, Inc.
NB PCIe Confi guration
PEG0 - Gen X
Enable PEG
[Auto]
[Enabled]
Chipset
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save and Reset
ESC: Exit
Enable PEG
To enables or disables the PEG.