DFI ST101-CP - Manual (Page 7)

7/9
11. Inser t the drive bay bracket
from the side of the system.
12. Secure the drive bay bracket by
fastening the screws you
removed earlier.
13. Replace the chassis cover and
secure it with the screw you
removed earlier.
14. Insert the provided power cord
holder. This will prevent the cord
from falling off easily or detach-
ing from the system.
Power cord
holder
Insert holder here
15. When you power up the system, configure the drives in the BIOS. Refer to the
system board manual in the provided DVD.
16. Refer to the manual or documentation enclosed with the drives for additional
information on using the drive.