DFI ST101-CP - Manual (Page 6)

6/9
9. Turn the drive bay bracket to the
top side. Insert the other end of
the cable for DVD-ROM (C)
through the bracket’s hole, up
to the top side of the bracket.
10. Connect the other end of the
cable for DVD-ROM (C) to
the SATA connector at the rear
of the optical drive.
Cable for DVD-ROM
8. Connect the SATA data cable
and SATA power cable (from the
system board) to their respective
connectors at the rear of the
SATA drive.
SATA power cable
SATA data cable
Cable for DVD-ROM