Devolo LAN Audio extender - Manual (Page 30)

Appendix
|
| devolo dLAN Audio extender |
30
5 Appendix
5.1 Help and optimization
This chapter provides help and instructions for optimizing the adapter. In case
of additional questions, you will find help in the Support area of our Internet site
under www.devolo.com.
5.1.1 dLAN connection
Slow transmission rate
Effect:
The connection rate between your dLAN adapter is very low.
Possible cause:
b
One of the adapters is plugged into a power strip. By switching one or sev-
eral power outlet boxes in series, the signal is weakened. This leads to a
reduced transmission efficiency.
Solution:
b
If possible, plug the respective adapter into a wall outlet.
Adapter cannot be found in the dLAN
Effect:
Even though the dLAN adapter is plugged into the receptacle, it cannot be found
by other dLAN adapters in the dLAN.
Possible causes:
b
The transmission signal is too weak. One of the adapters may be plugged
into a power strip.
b
The dLAN is not correctly configured, e.g. because the adapters are using
different dLAN passwords.
Solutions:
b
Plug the adapter from a power strip into a wall outlet.
b Reconfigure your dLAN by using the dLAN Configuration Wizard.