Devolo MicroLink ISDN Router - Manual (Page 23)

|
Router configuration 23
| devolo MicroLink ISDN Router & MicroLink dLAN ISDN Router |
EN
Please note that changing the IP address will block the setup wizard. The
setup wizard can only be used if the MicroLink (dLAN) ISDN Router can be
reached at its default IP address of '192.168.0.251' with the subnet mask of
'255.255.255.0'.
Port forwarding
The computers on your network are not directly accessible from other com-
puters on the Internet. To make web servers, FTP servers and other applica-
tions available, you can enable port forwarding.
Follow these steps to configure a port for port forwarding:
ቢ Click 'Port forwarding table'. The window that appears contains a table
that lists port ranges and the IP address corresponding to the target com-
puter.
ባ Click 'Add'.
ቤ Use the 'From port' and 'To port' fields to define the range of ports from
which incoming requests will be forwarded to the target computer (for
example, "80" for HTTP requests).
ብ For 'Forward to IP address', enter the IP address of the target computer to
which requests are to be forwarded.