Devolo MicroLink ISDN Router - Manual (Page 12)

Connection and installation
|
| devolo MicroLink ISDN Router & MicroLink dLAN ISDN Router |
12
EN
It is important to always start the router before the computers so that the
computers can receive their TCP/IP configuration from the router's DHCP
server while booting.
As each of the RJ45 sockets also functions as an uplink port, you may connect
either a computer or an additional switch (hub) to any of the four ports to link
more than four computers. Thanks to Auto MDI/X, you can use either cross-
over or normal cables. An LED labeled 'Link/Act' will be lit on the front panel
for every computer or every network device which is connected and powered
up.
For information on configuring the MicroLink (dLAN) ISDN Router, please see
the following Chapter “Router configuration” on page 15.
2.3 Networking examples
ቢ Networking of multiple workstations; Internet access via the MicroLink
ISDN Router
PC
Ethernet
NTBA
ISDN
MicroLink ISDN
Router
PC