Devolo MicroLink ISDN Router - Manual (Page 22)

Router configuration
|
| devolo MicroLink ISDN Router & MicroLink dLAN ISDN Router |
22
EN
If cost control is enabled, be sure you have enough time when connected to
complete large downloads. Once the maximum online time limit has elapsed,
the router disconnects from the Internet without any warning. Another option
is to use a download manager that allows you to resume downloads that
have been interrupted.
3.2.4 Local network
Network settings
On this screen you can specify the 'IP address' to be used to access your
router from the network. The default setting is '192.168.0.251'. This screen is
also used to specify the subnet mask (default: '255.255.255.0'). If you want to
use your MicroLink (dLAN) ISDN Router as a DHCP server, check the box next
to 'Automatically assign network settings for computers in the local area net-
work (DHCP server)'.