Devolo MicroLink ISDN Router - Manual (Page 19)

|
Router configuration 19
| devolo MicroLink ISDN Router & MicroLink dLAN ISDN Router |
EN
3.2.1 Start Advanced configuration
ቢ Open your browser and enter the URL 'http://192.168.0.251'.
ባ Select 'Management (for advanced users)'.
ቤ Click the 'Display expert configuration' link.
Keep in mind that the settings you have configured only take effect if you con-
firm them by clicking 'Save'.
3.2.2 General
Configuration access
Specify the configuration password here.
Select a password to prevent unauthorized access to the configuration of
your router. Enter it into both fields. Should you ever forget your password,
you will need to press the 'Factory Default' button. However, this will also
delete all of your configuration data. You will then need to set up the router
again. Save your new password by clicking 'Save'.
Please note that changing the configuration password will block the setup
wizard. Use of the setup wizard is disabled if a configuration password is set
up.
ISDN connection
For 'Own phone number (MSN)', specify the call number of your ISDN connec-
tion (without area code). If your router is connected to a branch exchange,
specify the number you have to dial to access an outside line in the 'Number
to access an outside line' field (such as "9").