Devolo dLAN 200 AV Wireless G - Manual (Page 25)

|
Configuration 25
|
devolo dLAN 200 AV Wireless G
|
3.5 Managment
Use the Management section to reset your current configuration to factory
defaults, save the configuration as a file on your computer or restore such a file
to the device, or update the firmware of the dLAN 200 AV Wireless G.
3.5.1 Reset configuration
Use Overview
̈
Management
̈
Reset configuration to reset your
dLAN 200 AV Wireless G to its factory defaults. Your personal settings will be
discarded during the reset. The most recently assigned dLAN password for the
dLAN 200 AV Wireless G will also be reset to the default password
"HomePlugAV". To again secure your dLAN 200 AV network individually,
configure the network either by using the encryption button (see '4.1 Encrypting
the dLAN 200 AV network at the touch of a button') or by using the dLAN
Configuration Wizard (see '4.2 Encrypting the dLAN 200 AV network with the
dLAN Configuration Wizard') again.